www.agilent.com/find/accessories network analyzer accessories and cal kits 108 coaxial mechanical calibration kits electrical specifications for 1.0 mm 50 ohm devices agilent 85059A precision calibration/verification kit, 1.0 mm the agilent 85059A is a 1.0 mm calibration/verification kit designed for vector network analyzer systems operating over the frequency range of 45 mhz to 110 ghz. the opens, shorts and loads in this kit were optimized to provide accurate calibrations over the specified frequency range. for best results, the calibration techniques recommended are the open-short- load-thru (oslt) calibration from 45 mhz to 50 ghz, and the offset-shorts calibration from 50 ghz to 110 ghz, all in one calibration sequence. specifications device frequency (ghz) parameter male female loads dc to 2 ghz return loss 30 db 30 db 2 ghz to 18 ghz 30 db 30 db 18 ghz to 40 ghz 26 db 26 db 40 ghz to 50 ghz 24 db 24 db opens dc to 2 ghz deviation from 1.0 1.0 2 ghz to 18 ghz nominal phase 1.5 3.0 18 ghz to 50 ghz 2.5 4.0 short 3 dc to 2 ghz deviation from 0.8 1.0 2 ghz to 18 ghz nominal phase 1.2 2.0 18 ghz to 50 ghz 1.5 2.5 50 ghz to 110 ghz 3.0 5.0 short 1 50 ghz to 110 ghz deviation from 2.5 4.0 nominal phase short 2 75 ghz to 110 ghz deviation from 2.5 4.0 nominal phase short 4 50 ghz to 75 ghz deviation from 2 4.5 nominal phase device frequency (ghz) parameter specifications lossy delay line dc to 110 ghz return loss 18 db adapters dc to 20 ghz return loss 24 db 20 ghz to 50 ghz 20 db 50 ghz to 75 ghz 18 db 75 ghz to 110 ghz 14 db verification match dc to 20 ghz return loss 24 db thru (adapter) 20 ghz to 50 ghz 20 db 50 ghz to 75 ghz 18 db 75 ghz to 110 ghz 14 db verification mismatch dc to 110 ghz return loss 6 db @ ~22.6 ghz thru (adapter) intervals 12
network analyzer accessories and cal kits 109 12 coaxial mechanical calibration kits replaceable parts description qty per kit agilent replacement part number shorts: m short 3 1 85059-60003 f short 3 1 85059-60007 m short 4 1 85059-60004 f short 4 1 85059-60008 m short 2 1 85059-60002 f short 2 1 85059-60006 m short 1 1 85059-60001 f short 1 1 85059-60005 opens: male open 1 85059-60009 female open 1 85059-60010 loads: male load 1 85059-60019 female load 1 85059-60020 lossy delay line 2 85059-60021 adapters: male to male adapter 1 11920-60001 female to female adapter 1 11920-60002 male to female adapter 1 11920-60003 cables: female to female cable (8.8 cm) 1 11500-60001 verification devices mismatched thru adapter 1 85059-60016 matched thru adapter 1 85059-60017 wrenches 6 mm 4 in-lb torque 1 8710-2079 6 mm open-end 1 8710-2156 agilent 85059A precision calibration/verification kit, 1.0 mm (continued)
|
